Page 1 of 2

Jennings "Mints of Quality" cash box needed

PostPosted: Sat Sep 01, 2018 4:36 pm
by shortrackskater
I have a Jennings "Mints of Quality" that I recently re-installed the delay pay mechanism on.

viewtopic.php?f=35&t=7018&start=10

However once I did this, I found that the cash box didn't clear and fit under the payout chute and "holding area." The box I have looks quite old but I suspected it might now be for that machine since the pull-out tab is on the side and not the end where you'd pull it out.
I don't know enough about these machines to know if this is a standard size for machines with the delay pay, so if someone knows, let me know.
And I will have the other cash box so I'm hoping I can just trade this one for the proper box.

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Mon Sep 03, 2018 9:52 am
by MONTI
Well I may be missing something here but I don't recall this shape coin can being used in a slot machine,
but I could be wrong, my wife tells me I am all the time! LOL
Pictured here below are various coin cans in the first photo and in the second photo are the designated names of slots they were used in!
Thanks to my late Great Friend Tom Krahl for these photos which came out of his catalog!
RIP MY Friend!
MONTI

coin cans & names1.jpg


coin cans & names2.jpg

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Mon Sep 03, 2018 2:36 pm
by shortrackskater
Something like #29 or #36 looks close but I'd need measurements. I'll check Dave's catalog... totally forgot! But thank you Monti, as always!!

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Mon Sep 17, 2018 4:44 pm
by shortrackskater
Does ANYONE have any Jennings slot machines? I'd think the cash box might be standard for some machines. Aren't there any specs in existence that show the box for this machine, or one like it?
My box is an exact fit, it just had the pull tab on the long side and, now that the delay pay stuff is back, doesn't slide under.

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Tue Sep 18, 2018 11:49 am
by Rick B
Best I can do is show you mine and size. It is #36 in the picture above. Rick B

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Tue Sep 18, 2018 8:14 pm
by montanaslots
IMG_0812.JPG
This is the coin box #34 from the Tom Krahl catalogue, I have had it for almost 20 years and it was used in Jennings Goosenecks. This works fine in a patent date 1922 Jennings Gooseneck with the curved reel glass (Not sure about mint vendors but it was for Jennings goosenecks. I will trade for a Mills Black Cherry style cash box. My cash box is new and unused and hard to find now. you can email me at mtslots@cox.net. Regards, Dave aka Montana Slots

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Wed Sep 19, 2018 7:32 am
by flipper77
Do have an original Jennings gooseneck cash box for sale if this is what you are seeking. PM if interested or with questions. Flip

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Wed Sep 19, 2018 9:55 am
by shortrackskater
Thanks Rick and Flip! Definitely not the Gooseneck box. Mine is just rectangular, no extension part for the cash box chute. I'll do some measuring again and see if that first one will fit.

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Wed Sep 19, 2018 10:36 am
by jslots
This is the correct cashbox for the Jennings Mints of Quality. Jennings part #CV 23 CSP. Jim

Re: Jennings "Mints of Quality" cash box needed

PostPosted: Thu Sep 20, 2018 9:17 am
by shortrackskater
Thanks for all the responses everyone. This is exactly what I needed. I'm slowly getting this machine back to it's original state, somewhat!