Game Disabled Vidco Vision money spinner

[carlmaynard]

Hi im new to this and dont know if im in the right section but im looking for some help on an old machine. I have managed to get the machine booted but cant get it past game disabled 129. A manual or some help on the settings would be great.

From what i can find vidco became shuffle master then SHFL entertainment and now bally.

Thanks

[SLOT DYNASTY]

Hi Carl, and welcome to our Forum. Although most of us are more into mechanical machines, there is
at least one of our members that knows a lot about the electronic generation, and may chime-in if he
knows which machine you are dealing with. If you post a pix of your machine, it may help with more
than one response. Bill

[carlmaynard]

hi bill

Thanks for the reply. Im not sure how to upload pictures so hopefully these links work
https://onedrive.live.com/redir?resid=7 ... hoto%2cjpg
https://onedrive.live.com/redir?resid=7 ... hoto%2cjpg
https://onedrive.live.com/redir?resid=7 ... hoto%2cjpg
https://onedrive.live.com/redir?resid=7 ... hoto%2cjpg
https://onedrive.live.com/redir?resid=7 ... hoto%2cjpg
https://onedrive.live.com/redir?resid=7 ... hoto%2cjpg
https://onedrive.live.com/redir?resid=7 ... hoto%2cjpg

Thanks for the reply. I have played with the variable settings and when I change Glock and Slock to yes the machine changes from game disabled 129 to game disabled 1.

If I change Glock and Slock to yes I can only change the date and time. I have worked out that if I disconnect the printer and reset the machine and then reset current errors. It changes Glock and Slock to NO and I can change more settings.

I can change
GMID
SERIAL
LINK ADDRESS
CLOCK
SALP A
SALP B
SLOCK
GLOCK

Do you know what any of the settings mean in the attached picture? Or does the machine look familiar to something similar? Any help would be great

Thanks carl

[SLOT DYNASTY]

Hi Carl:
Well, this is way out of my relm. I haven't got the foggiest, as to all those features on the screen.
Wish I could help, but hopefully our resident electronic machine expert will join in. Good luck.
Bill