by SLOT DYNASTY » Sun Oct 30, 2016 4:02 pm
Bruce:
Randy is right. DO NOT force anything, especially with a screwdriver, or the like. Many Pot-Metal parts may look OK,
and smooth on the outside, but will be deteriorating from within. Once you break the surface, your next words will
be "Oh S**t", as you see hundreds of little pieces on the bench. Do send some good closeup pics, so that someone may
be able to determine where your problem lies.
I am not as familiar with Vest Pocket mechs. as others, but from what you mentioned trying earlier, the jamb is most
likely under the coin slide.
Bill