mechanic wrote:Your missing the mechanisms vendor trip lever which attaches to the backspin lever. You do have the screw to mount it in the back i see. Your also missing the vendor trip linage that goes onto the vendor housing. The two similar parts on the sub-base are for the escalator.
oldslotman wrote:It appears that you are missing all of the linkage needed to get the gold award to work. And based on the color of the reel they appear to newer and most likely not the ones for the gold award to work. It is possible to maybe everything that you need but it may take some time and money. You can alway paint the glass that shows the gold award tokens the same color as your machine to make it look like part of the castings. The two parts that you have are from the esculator. I do not have a machine at this time with the gold award but maybe someone else can posts some pictures of one working and the parts you are missing.
JHSS-1944 wrote:Welcome to the forum !!!
glad you could join us.
First , I have no "extra" parts at this time but , images to show you what to look for / need. look for the 3 notches in the discs red arrow. green arrow for part that fits into it. no notch = replace full bundle assembly.
Next missing 2 (?) pieces & a spring. some versions have slightly different looking parts.
Next ,the award trip push bar , variations of this to ,depending on era & coin denomination.
last photo of a bar shown out side of where it goes, with arrows to the ends seen on the one still installed. you have the back shoulder screw buy the 2nd one might be gone.
Return to Repair / Restoration Questions
Users browsing this forum: No registered users and 31 guests