Little Duke question

This is the area to talk about everything regarding repairing and restoring machines.

Little Duke question

Postby rtmccurdy » Thu Jul 11, 2019 6:17 pm

I have been working on several Little Dukes this summer and have a problem with an early machine. Serial 3347, small coin head, pre timing rod mech. There is a weighted tin flap (in front bronze area) that either deflects the penny into the coin tube or to the coin box. On this machine it is only sending coins to the coin box. It has several bends so if someone has a similar machine I would appreciate a photo or two to see if this one is bent incorrectly. I've included a few photos for reference and photo #2 is where it rests all of the time (photo #1 would send the coins to the coin tube). Thanks!
Attachments
IMG_20190711_153549308.jpg
IMG_20190711_153533056.jpg
IMG_20190710_071529653.jpg
rtmccurdy
 
Posts: 252
Joined: Fri Dec 13, 2013 7:59 am
Location: White, South Dakota

Return to Repair / Restoration Questions

Who is online

Users browsing this forum: No registered users and 18 guests

cron