CoinOpCollectorForum.com

I have a 25 cent ROT with a home-made denomination medallion on it (No, somebody else did it!)

It needs to be replaced, but I have seen two different types of medallions on pictures of ROT's. One is the repro brass with inlayed red lettering, the other a painted one with a serrated edge.

What is the correct medallion for this machine? And if it should be the serrated one, where I can find one? (The brass repro is on EBay)

Thanks for the help

all you need to know has already been discussed on this very forum-
viewtopic.php?f=9&t=4631&hilit=watling+denomination

Thank you for the assist. I will assume that the screw orientation as the determination for the proper denomination badges for the Rol-A-Tor is the same as the Rol-A-Top.

YEs , and for your Machine , it s the painted one with a serrated edge .
Nobody made reproduction of it !!
Rick Frink sell a printed paper that you glue on a Blank badge .
https://sites.google.com/view/reelstrips/

Maybe Mrslot1 also ,but not sure !
http://www.mrslot1.com/

Stephane