by flipper77 » Fri Nov 03, 2017 4:27 am
Good advice from Sam. A close look at that clock confirms that there is rust on the gears and rust on the bearings - not good. One problem with the Watling Baby Bell(and other small machines such as QT, Little Duke/Duchess) is that clock is mounted vertically rather than horizontal. So clock lube needs more frequent attention. You can try to oil the clock while installed but I have found that you need to remove the clock, take it apart and clean each piece carefully. Most then go back together and work fine. But sounds easy - removing clock, taking it apart, putting it back together right and re-installing - can be a challenge, especially first time. Machine looks good so worth the time invested. Flip.