Exhibit Supply Novelty Merchantman Digger

This area of the forum is for arcade style machines.

This is a new area and was created on 2/7/207.

Exhibit Supply Novelty Merchantman Digger

Postby geezertom » Sat Jan 13, 2018 3:04 pm

Any and all knowledge of parts, paperwork, ads would be appreciated. Currently trying to find internal cams and motor that drive operating levers. Would like to correspond with anyone who has Exhibit Supply Digger.
geezertom
 
Posts: 3
Joined: Thu Jan 11, 2018 10:15 am

Re: Exhibit Supply Novelty Merchantman Digger

Postby SLOTMANDAVE » Sat Jan 13, 2018 5:46 pm

Hi, I also just picked one up and have no idea where to start with it, My cabinet is in rough shape but I can handle that, but as far as the gears and workings of it that will be a job to figure out. If you find any one who can help please post it.
Thanks dave
SLOTMANDAVE
 
Posts: 76
Joined: Fri Nov 12, 2004 6:48 pm
Location: MASS. 02777

Re: Exhibit Supply Novelty Merchantman Digger

Postby clubconsoles » Sun Jan 14, 2018 10:14 am

I restored one a few years ago, but have no parts sorry.
mine has a replacement motor.
Have you tried James roller, he has lots of parts for diggers?
Attachments
26857219_10213685858615039_1920313236_n.jpg
User avatar
clubconsoles
 
Posts: 193
Joined: Sun May 02, 2010 10:15 am
Location: Lowestoft, Suffolk UK

Re: Exhibit Supply Novelty Merchantman Digger

Postby geezertom » Tue Feb 27, 2018 4:29 pm

I completely re-did the insides of the Novelty Merchantman. I've had it for 25 years and it worked fine then in the last couple of years went wackey. Exact same one as shown in clubconsoles's photo on posting. Unfortunately, Jim Roller has retired and sold off all of his stuff. He has been a wealth of knowledge with suggestions and such. The cams in my machine are completely non stock, done with phenolic cams from some other machine and they started slipping on the shaft. I believe that whoever re did this machine originally had very little in the way of a shop at their disposal. You have to sit for a long time studying how this baby works to be able to fix it because there just is no information out there. Even Jim toldd me that he has never seen any type of manual for it. The movement on mine was based on micro switches to start and stop and a motor that had pulleys and a v belt. Original machine was all gears from what I have seen.

Mine never had the cast alum art deco feet and would love desperately to find some. Probably a fools errand. I have tons of photos of the progress which I would share if there is interest. I probably would just send them via email to anyone interested.

So, if anyone has a source for the feet I would love to hear about it.
geezertom
 
Posts: 3
Joined: Thu Jan 11, 2018 10:15 am


Return to Arcade

Who is online

Users browsing this forum: No registered users and 2 guests