New member, two Mills

Have a generic question? Post it here.

If you have a question regarding a specific slot machine or trade stimulator please post it in either the Slot or Trade Stimulator area.

New member, two Mills

Postby 00247 » Thu Apr 05, 2018 8:39 am

Greetings, I just joined the forum as I just got in two Mills slot machines. One I bought and the other I need to do some painting for the fellow who bought them from an estate. Both machines were on the floor in a damp basement so the award cards, award card frames, and the base wood are in poor condition. The one I got is an Extaordinary 10¢ which is in better condition of the two.

Image

The paint is poor but the internals are in nice shape and seem to run fine. It had a vendor on the side which is missing. My intentions are to restore the outside but thought I would ask opinions about leaving as is. In my opinion an Extraordinary needs all the help it can get to look attractive. It will be a show piece to sit on one of my restored bank safes. I am a stickler to honor the original design as close as possible. Here are a couple pictures of safes recently done. I am currently finishing up a 1906 National Manganese Money Chest.

A 1891 Mosler Screw Door Bank Safe, extremely rare double door model.

Image

A 1915 Mosler Screw door Bank safe with a 1907 National cash register.

Image

A 1908 Victor Cannonball.

Image


The other Mills is a Lion head 5¢. It is in poor cosmetic condition. The yellow was repainted orange and the black was slopped up which looks like the handy work of the proverbial 3rd grader. It also has a broken edge on one side of the upper front cover. The bottom board is in poor condition. The internals are good. It too had a vendor on it at one time and now has a cover plate at the bottom. The owner wants new paint and the bottom board repaired as best as possible but of coarse doesn't want to spent to much. I feel it is a good candidate for new paint and a light brightening of the exposed metal.

Image

I am capable of high quality work, nothing shoddy done here. Please note, the pictures of the slots were not taken in my shop! I keep mine vacuumed. :wink:
I will have some follow up questions.

So, let the opinions fly on both slots. Thanks.
00247
 
Posts: 2
Joined: Thu Apr 05, 2018 3:55 am
Location: Wisconsin

Re: New member, two Mills

Postby randyvw » Thu Apr 05, 2018 9:03 am

what's with the wood base on the extraordinary? it's smaller than it should be, isn't it? did that come out of a console? i got lots of 'em, but i aint gonna go dig up keys and look inside one of them to figger this out. someone here can answer that question without looking, i would think.
randyvw
 
Posts: 77
Joined: Sun Sep 21, 2014 9:13 pm

Re: New member, two Mills

Postby sam2002 » Thu Apr 05, 2018 9:31 am

Safes are looking very nice ! Cannonball is a neat little safe . That double must weigh a ton !
sam2002
 
Posts: 451
Joined: Wed Feb 01, 2012 4:45 pm

Re: New member, two Mills

Postby 00247 » Thu Apr 05, 2018 12:05 pm

Yes, the front of the wood base on the extraordinary barely sticks out and is original. The rear is broken off and had the two pins in it but only in the rear. It may have been in a cabinet. IDK.

The wood base on the Lion is also broken off in the back but it had two pins front and back. What was the purpose of these pins and did they simply nail in? The rear door is painted as a wood grain. I assume I should leave that alone if original?

The double door a ton? I wish, just over 2 tons. It forced me to buy a fork lift. :shock:
00247
 
Posts: 2
Joined: Thu Apr 05, 2018 3:55 am
Location: Wisconsin

Re: New member, two Mills

Postby randyvw » Thu Apr 05, 2018 10:24 pm

sorry, but i gotta tell this story, couldn't resist. i had one of those cannonball safes that was about 5 feet high, as i recall. we were watching the movie "maverick", with mel gibson and james garner, and they had one on a riverboat. it was to hold the money in a satchel for the poker tournament they were having on the boat. it was a very important part in the movie, it showed a close-up of the satchel in the safe,but it was VERY apparent that the safe would never hold a satchel that big. since we owned one, we could see that they had cut the satchel up, and only one end of it could have been in that safe. we had a good laugh over the whole thing, even if everyone else did't get the joke. some also may not know, but the safe had a clock inside the door, so it could only be opened at a certain time, i suppose. and it was made of manganese, if i recall correctly. there are evidently 2 sizes only of those. a very cool safe, and TOP-HEAVY as hell.
randyvw
 
Posts: 77
Joined: Sun Sep 21, 2014 9:13 pm


Return to Just Chatting

Who is online

Users browsing this forum: No registered users and 2 guests