CoinOpCollectorForum.com

Posted: **Sat Jul 23, 2016 11:52 pm**

Hello to all;
Would any one have some photos of the skill stop button system / parts ?

bought a Mills goose neck version roman head slot (awhile back) but, about half of the parts for the skill stop missing.
it's the "on top" button type.
I think I might have to make these missing parts. I do have the patent artwork of it = july 1928/ 1931, & the march 1929/ 1932 version; but only an overview of the whole thing.

need a few images, with an estimate on sizes of the parts OR something to help relate the sizes.

thank you.
jeff H.

Posted: **Sun Jul 24, 2016 12:00 am**

I have a skill stop machine Mills castle front the guts inside might be the same come on over and you can take it apart look it over and get an ideal of what will work.

Posted: **Sun Jul 24, 2016 12:12 am**

Well, mine is missing the side bracket (screwed to the frame), the shaft, the 3 pieces below the buttons , & maybe something else (?) near the base. I'll have to look again.

Richard , I'll talk to you soon....... (go to bed).
jeff H.

Posted: **Mon Jul 25, 2016 3:00 am**

o.k. looks like I'm missing ;
pb 52 (x3)....6-32 shoulder screws (big deal)
1263 stop bar.
1259 stop trip lever shoe (?).... (x 1 or x 3 = ???).
1262 (x 3) stop lever connection.
1254 (x 3) push lever
1267 stop lever shaft.
1181A push lever bracket.

so , every thing above the middle & everything below the middle !!!
have parts ;
1261 stop lever links
1250 csp stop levers with springs
1257 stop levers (of course)
1258 csp stop trip levers (of course)
93 reel stop lever springs (of course).

I wrote out All of the parts for the skill stop version (s), with part numbers & with variations ( FOK vs Bell COK), from the operator's Manual parts list.

jeff H.

Posted: **Fri Jul 29, 2016 1:41 am**

just need some quality photos of the mechanics out of the cabinet.
help, help , help.
jeff H.

Posted: **Fri Jul 29, 2016 5:03 am**

Hi Jeff
I m working for this and send all photos that you need ASAP( few hours !)
Stephane

Posted: **Fri Jul 29, 2016 8:06 am**

Hi Again
There is some photos !
If you need more info , let me know !
Stephane

For info this is the "1259 stop trip lever shoe " ,so , you need 3 !One on each arm !

: 1259 stop trip lever shoe

Posted: **Fri Jul 29, 2016 8:37 am**

Bravo Stéphane !! (In french !!)

Posted: **Sat Jul 30, 2016 1:03 am**

Stephane ; Thank you very much for these Great photos !!!!!
exactly what I was hoping for !!

can you give me the rough size estimate on part #1263 ( stop bar) Not shown),how tall ?
I should be able to make something very close from these photos for my slot machine.

can you Please give length of part # 1262 ( stop lever connection) ?? if I get this correct , the rest will be easier to modify to fit & work.

WOW ! Thank you again Stephane.
Best regards; Jeff H.

Posted: **Sat Jul 30, 2016 7:00 am**

Hi Jeff
Oupps , I forgot the 1263 !Sorry
You must have all info on this photos ! let me know if need more !
Stephane

Warning !! All this info are for the "ON TOP" skill stop only !!!The others are different !!!