Page 1 of 3

Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Thu Oct 15, 2020 2:56 pm
by integ194
I am in the process of restoring this machine. I have not been able to find a suitable wrinkle finish match to this green. Has anyone found a near match? Thks Wayne

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Thu Oct 15, 2020 3:42 pm
by 5$ed
Find an old radio equipment repair guy. Same paint they used during the war

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Thu Oct 15, 2020 3:46 pm
by radiorich123
HI I have some in my stock. Will let you know.

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Thu Oct 15, 2020 4:31 pm
by sm1116
IMG_0015.jpg
What you want is what Mills called the "Hammered" look finish. They achieved this by using linseed oil in the paint.
I used the "hammered" spray paint by Rustoleum and Kilz.
I used a gray primer that I sanded to a ultra smooth finish.
It is tricky putting on the paint as you can only do one side at a time on a horizontal surface.
Good luck.

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Thu Oct 15, 2020 5:05 pm
by RameGoom
You might consider powder coating it.

I used a green hammertone finish on a few of my old gum venders, with incredible results. And much better than paint.

I have become a big fan of powder coating.

stoner-green.jpg

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Thu Oct 15, 2020 11:16 pm
by integ194
Thanks to all for assistance-I will await further info from radiorich123

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Fri Oct 16, 2020 6:41 am
by radiorich123
Have a hammertone can that is 2/3 full for 20.00 and free shipping in the USA. Here is the machine that I used it on.

Rich

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Fri Oct 16, 2020 7:47 am
by oldslotman
Hammerite paint no longer being made.

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Fri Oct 16, 2020 8:14 am
by cangrande
"Test your Skill"

LOL skill at what? I love these old machines.

Re: Mills Vest pocket trade stimulator-green wrinkle finish

PostPosted: Fri Oct 16, 2020 3:58 pm
by integ194
Thanks for your response and offer radiorich123 but I was really wanting a finish which more closely resembled the original which is a darker green in wrinkle finish. I can access a hammer finish locally which is a slightly lighter shade of green than your finish which I had previously used on a Spin-It but I would prefer a wrinkle finish. If I ultimately choose a hammer finish I can create that finish with a darker green.