Slot Machine Stand Replacement Glass or Thin Film Laminate

This is the area to talk about everything regarding repairing and restoring machines.

Slot Machine Stand Replacement Glass or Thin Film Laminate

Postby scottzearbaugh » Fri Jun 25, 2021 3:57 pm

Hello, I am looking for help. I purchased a modern slot machine stand. The glass / plexiglass with the thin film adhesive picture is missing on the front. Where would a go to take a current picture or picture with glass adhered to get a replacement made. Is is possible to just take one out of an existing stand to someplace that would take a photo. Then use this to create on a thin film laminate that could be installed on glass or plexiglass. It this a standard process. Thanks for your help.
Scott
Attachments
slot machine stand example.jpg
scottzearbaugh
 
Posts: 61
Joined: Sat Apr 16, 2016 4:24 pm

Re: Slot Machine Stand Replacement Glass or Thin Film Lamina

Postby scottzearbaugh » Fri Jun 25, 2021 4:01 pm

This was just an example. Mine is missing the glass and has different dimensions.
Scott
scottzearbaugh
 
Posts: 61
Joined: Sat Apr 16, 2016 4:24 pm

Re: Slot Machine Stand Replacement Glass or Thin Film Lamina

Postby MONTI » Sat Jun 26, 2021 11:59 am

Not sure what kind of Slot Stand/cabinet you have with no photo but if it is similar to the one you posted here on the forum you may want to check with Mike Studebaker as he may have a direct replacement glass panel you can use rather than go to the expense of scanning and producing one for you!
He is one of the "Old Timers" who has been making these stands for many years!
His contact information below;
https://specialtystands.com/

BONA FORTUNA!
MONTI
MONTI'S SLOT SHOP
BUY * SELL * TRADE * RESTORE
Over 50 years experience in slot restoration

Serving Northern California, Nevada & Beyond
User avatar
MONTI
 
Posts: 583
Joined: Sun Nov 07, 2010 6:35 pm
Location: NORTHERN CALIFORNIA

Re: Slot Machine Stand Replacement Glass or Thin Film Lamina

Postby scottzearbaugh » Sat Jun 26, 2021 12:37 pm

Glass is 14 inches tall and 12 inches wide. I did send a message to Mike.
Attachments
C102DF27-A2A7-4C1B-B79B-283BD7A3DF3C.jpeg
scottzearbaugh
 
Posts: 61
Joined: Sat Apr 16, 2016 4:24 pm

Re: Slot Machine Stand Replacement Glass or Thin Film Lamina

Postby scottzearbaugh » Thu Jul 29, 2021 4:30 pm

I was able to contact my local graphics printing company and get one made. I went to my local hardware store and got some plexiglass. I now have my broken slot machine stand back in tip top shape. Thanks for the ideas and help!
scottzearbaugh
 
Posts: 61
Joined: Sat Apr 16, 2016 4:24 pm


Return to Repair / Restoration Questions

Who is online

Users browsing this forum: No registered users and 16 guests

cron