Need Mills QT part

This is the area to talk about everything regarding repairing and restoring machines.

Need Mills QT part

Postby Walter Newton » Sun Jun 27, 2021 6:32 am

I have a nice Mills QT "Firebird" which works fine, except in one area. The jackpots do not fill evenly.

It appears (see picture below), that someone, in trying to replace what should be just a pin, welded a bolt head onto the linkage.

This is the linkage that advances the jackpot fill chute, from right to left, and so on.

Because this bolt head is 1/16 to 1/8 different than the pin that should be in that place, it moves the jackpot fill ratchet only about 2/3 of the distance that it should be moving.

So, I need the part (see below) that has the small pin on it.

I need just the part, but any other linkage is OK, as long as that one part is part of the set.

Pictures show what's going on and you can see the linkage part I need.

I'm willing to pay a good price.
Attachments
mills_qt_left_side.JPG
mills_qt_left_example.jpg
Walter Newton
 
Posts: 78
Joined: Fri Jan 08, 2021 3:39 am

Re: Need Mills QT part

Postby rtmccurdy » Sun Jun 27, 2021 7:26 am

Is this what you need? $35 plus $4.95 shipping. Message me for email, etc. Thanks, Robert
Attachments
PXL_20210627_142423278.MP.jpg
rtmccurdy
 
Posts: 252
Joined: Fri Dec 13, 2013 7:59 am
Location: White, South Dakota

Re: Need Mills QT part

Postby Walter Newton » Sun Jun 27, 2021 11:30 am

rtmccurdy wrote:Is this what you need? $35 plus $4.95 shipping. Message me for email, etc. Thanks, Robert


PM sent.
Walter Newton
 
Posts: 78
Joined: Fri Jan 08, 2021 3:39 am


Return to Repair / Restoration Questions

Who is online

Users browsing this forum: No registered users and 19 guests