1262 stop lever connection should have been thinner in each direction.
1254 push levers should have been thicker material.
1263 stop bar actually needed to have the holes off set a little , so it would be closer to the frame. #1 S.L.connection barely touches it.
all holes with a basic drill (not a drill press). all pieces that needed to be bent , were done using a heavy vice mounted on a sturdy table, & a hammer ! (and a little help with a 1/4 inch thick nut for the s.l. connections).
for the push levers, I made a templet to place on each metal pieces ,then etched around it. Then used a few different table top grinders to shape it to the etched lines. And again , bent in a vise.
micro blasted some of the parts. most of the cutting done on a band saw. all shaping with grinders.
much use with hand files for burrs.
shaft & spacers were stuff found a work in the "scrap pile". yep, a multi million dollar company ,& we have to make are own stuff from time to time.
jeff H.
