Do you?
what is the best way to free up old peanut machines that are frozen with salt etc?
CoinOpCollectorForum.com
Forum for those interested in antique coin operated devices
what is the best way to free up old peanut machines that are
2 posts
• Page 1 of 1
what is the best way to free up old peanut machines that are
by Jackpot » Mon Sep 22, 2008 9:43 am
Someone asked me this question, well I don't know......
Do you?
what is the best way to free up old peanut machines that are frozen with salt etc?
Do you?
what is the best way to free up old peanut machines that are frozen with salt etc?
I Buy-sell-trade coin op's. I also have some later model slot parts. There are piles of manuals at:
http://coinslots.com/page21.html
http://coinslots.com/page21.html
- Jackpot
- Posts: 94
- Joined: Wed Nov 24, 2004 9:15 am
- Location: Shoreline Washington
by PA23 » Mon Sep 22, 2008 12:08 pm
depends upon how far you want to disassemble the machine and how badly corroded the parts are.
If you need to loosen the parts for disassembly I would recommend a high quality penetrating oil such as Kroil. (PB-blaster and liquid wrench are poor excuses for penetrating oils and WD-40 is not a penetrating oil) let the parts soak for a few hours and you can probably just remove the parts. I would then suggest a complete disassembly and properly clean the parts and remove the rust.
If you need to loosen the parts for disassembly I would recommend a high quality penetrating oil such as Kroil. (PB-blaster and liquid wrench are poor excuses for penetrating oils and WD-40 is not a penetrating oil) let the parts soak for a few hours and you can probably just remove the parts. I would then suggest a complete disassembly and properly clean the parts and remove the rust.
- PA23
- Posts: 39
- Joined: Thu Jan 18, 2007 8:54 am
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest